| NO. |
Discription |
Parameter |
1 |
X,Y,Z Working Area |
1500X3000X200mm |
2 |
Table Size |
1575X3640mm |
3 |
X,Y,Z Traveling Positioning Accuracy |
”Ą0.05/300mm |
4 |
X,Y,Z repositioning Positioning Accuracy |
”Ą0.05mm |
5 |
Table Surface |
T-slot Extrusions |
6 |
Frame |
Steel Square Tubes |
7 |
X-Y Structure |
Rack and Pinion Drive, Hiwin RailLinear Bearings |
8 |
Z Structure |
Ball Screw and Hiwin Rail Linear Bearings |
9 |
Max. Power Consumption(Without spindle) |
2.0KW |
10 |
Max. Rapid Travel Rate |
32000mm/min |
11 |
Max. Working Speed |
15000mm/min |
12 |
Spindle Power |
2.0/3.5Kw HSD Spindle |
13 |
Spindle Speed |
6000-18000RPM |
14 |
Drive Motors |
Stepper Motors |
15 |
Working Voltage |
AC220V/50/60Hz,3PH (Option: 380V) |
16 |
Command Language |
G code |
17 |
Operating System |
WinCnC PC Software /DSP System |
18 |
Interface |
PCI / Parelle Port / USB |
19 |
Flash Memory |
128M(U Disk for DSP system only) |
20 |
Collet |
ER25 |
21 |
X-Y Resolution |
<0.02mm |
22 |
Software Compatability |
Type3 software, Wentai software,Artcam software |
23 |
Running Environment |
Temperature: 0”ꔫ45”ę
Relative humidity: 30%”«75% |
24 |
Packing Size
|
3750X1900X1800mm |
25 |
Net Weight |
1550KG |
26 |
Gross Weight |
1780KG |
””””All parameters above subject to change without prior notice |
MAXW1212-S2
a. Vacuum table (Vacuum table and T-slot )